Psi-value 1 Construction

<< Click to Display Table of Contents >>

Navigation:  Lessons > Psi-value and U-value Calculations >

Psi-value 1 Construction

, ,
Psi-Values with 1 Component will be usefully calculated for constructions where 2 components are connected with the same U-value or where a construction is interrupted by a single component (e.g. mullion of a curtain wall, wall ceiling junction).


Click on the graphic below to start the video.

Psi-value 1 Construction



A Psi-value with 1 component is defined using the Psi-Value tool 1 Construction by applying 2 mouse clicks. The two points define the surface line, through which the effective heat flow should be calculated counterclockwise. The points are captured if the snap functions  are active (Grid , Guidelines and Objects , cf. menu Arrange).

You can adjust the properties of the Psi-value calculation in the Properties flyout.

Click here or on the navigation buttons in the title in order to continue with the lesson.